Dayton Die Cushions
6330 Industrial Dr, Eden Prairie Mn 55346, USA
[email protected]
About Us
 Die Cushion Models
Model HD
>>Products >>Models >>Model HMC

Model HMC Die Cushion is rugged, heavy duty unit that produces extremely high R.H.F. within a given area, and is designed to withstand long, continuous heavy stamping operations including compound blanking and drawing. THE MOST POWERFUL PNEUMATIC DIE CUSHION AVAILABLE.

* Mounting may be made to bolster plate, to press frame or to the press superstructure with a large mounting plate to the mounting surface.
* Construction is of high grade steel, welded and normalized with bronzed bearing surfaces for long wear.
* Extra overlap between cylinder and piston and the center stem assures excellent internal guiding. External guiding mechanism can be designed to eliminate off-center load damage.
* This series has a dual chamber design and includes a booster pump as standard equipment resulting in extremely high R.H.F.
* An internal centralized lubrication system distributes lubricant by channeling through space provided between concentric tubes within the piston rod, thereby eliminating grease tubing. External centralized fittings available at customer's option.
* All units are complete with standard or custom built pin pad, all necessary mounting structure, pressure regulator, gauge, booster pump, hoses, fittings, surge tank with safety pop-off-valve, drain cock, and Installation Service Manual.
* Each installation is warranted for one year from date of shipment.
More Information:
Model HMC Catalog
3D Model of HMC Type Die Cushion


Model C
Model D
Model HC
Model HD
Model MC
Model MD
Model HMC
Entire Catalog