| |
|
| Model
MD Die Cushion is very popular with the stamper who has
a wide variety of jobs and who must frequently change dies. Unit
provides extremely high ring holding force by virtue of a double
piston design. |
|
FEATURES:
* Operates at normal 100 P.S.I. shop air pressure.
* An adjustable nut at the bottom of the piston provides stroke variations
up to 5/8".
* Mounting may be made to bolster plate, to the press frame or to
the bed superstructure.
* Construction is of steel, welded and normalized, with bronzed bearing
surface.
* Standard pin pads are hardened and ground. Pin pads are available
in round, rectangular or square shapes.
* Raised pin pads can be supplied for fitting to smaller than normal
bed openings or to allow for slug removal by adding a hole in the
pin pad with a slug chute.
* Lubrication fittings are positioned at the front of the front of
the lower flange on standard designs. An external centralized greasing
system available as a customer option.
* The unit features excellent guiding by use of an internal cylinder
rod, and generous cylinder to piston overlap. External guiding mechanism
available.
* Furnished complete with pin pad, mounting structure, surge tank,
regulator, gauge hoses, fittings and Installation and Service Manual.
* Each installation is warranted for one year from date of shipment. |
|
|
|
Dayton
Die Cushions
