|
|
|
| Model
MC Die Cushion is adaptable to medium size and large presses
where a great deal of Ring Holding Force is required. It is built
to withstand long, heavy stamping operations such as compound blanking,
forming and drawing at normal shop airline pressure. |
|
FEATURES:
* Operates at normal 100 psi shop air pressure.
* Incorporates a dual piston design with a very ruggedly built frame
to double the ring holding force (RHF) of other models of similar
diameter in approximately the same price.
* Mounting may be made to bolster plate, to the press frame, or bed
superstructure.
* Constructed of steel cylinder welded and normalized, cast pistons
and solid steel center rod.
* Standard pin pads are hardened and ground. Pin pads are available
in round, rectangular or square shapes.
* Raised pin pads can be made to fit smaller than normal bed openings
or to allow for slug removal by adding a hole in the pin pad with
slug chute.
* Lubrication fittings are positioned at the front of the lower flange
on standard designs. External centralized greasing systems available
at customer option.
* The unit features excellent guiding by use of internal cylinder
rod and generous cylinder to piston overlap. External guiding mechanism
available.
* Furnished complete with pin pad, mounting structure, surge tank,
regulator, gauge, hoses, fittings and Installation Service Manual.
* Each installation is warranted for one year from date of shipment. |
|
|
|
Dayton
Die Cushions
