| |
|
| Model
D Die Cushion has an exclusive adjustable stroke (draw)
feature. This series is very popular with the shops that run a wide
variety of stamping jobs and must frequently change dies. |
|
FEATURES:
* Operates at normal shop air pressure. Booster pump is not required.
* Mounting may be made to the bolster plate or to the press frame
or bed superstructure.
* Construction is of steel cylinder, welded & normalized with
a hard-chromed internal cylinder rod and a cast iron piston.
* Standard pin pads are through hardened and ground. Special pin pads
are available in round, rectangular or square shapes to fit bed opening.
* Lubrication fittings are positioned at the front of the lower flange
on standard designs.
* Raised pin pads can be provided to fit smaller than normal bed openings
or to allow for slug removal by adding a hole in the pin pad with
a slug chute (requires that cushion be mounted to press frame).
* The unit features excellent internal guiding by use of a cylinder
rod & generous cylinder to piston overlap.
* Furnished complete with pin pad, mounting structure, regulator,
gauge, hoses, fittings and Installation Service Manual. Surge tanks
optional for increased die cushion draw strokes.
* Each installation is warranted for one year from date of shipment. |
|
|
|
Dayton
Die Cushions
